How old are Hampton Cove houses?
The golf complex on the Robert Trent Jones Golf Trail opened in 1993, and the Hays family developed housing on land around it. Huntsville finished the road over Blevins Gap in 1998, and almost 4,500 houses were built in Big Cove after 1990. Source: Hampton Cove, Encyclopedia of Alabama.
Census estimates for the 35763 ZIP area, which includes Hampton Cove and Owens Cross Roads, put the median house at 2006. About 73 percent of its roughly 7,400 homes were built in 2000 or later, and none are recorded before 1940. Source: U.S. Census Bureau ACS 2020-2024 5-year, table B25034 for ZIP area 35763, via Census Reporter. Most floors here are builder installs from the last 30 years, not original oak from the 1950s.
What hardwood work comes up in Hampton Cove?
Two common cases: replacing carpet or builder vinyl with new hardwood, and freshening a site-finished or prefinished floor that is worn but sound. A floor with a thick enough wear layer can often be screened and recoated or refinished. Thin engineered floors may not take a full sand. Ask for the product name if you have it.
If the house has stairs, they are priced on the stairs page as their own line. This site does not claim Hampton Cove jobs or photos. The projects page says what a real gallery will show.
Which permit office has a Hampton Cove address?
Check, do not assume. Huntsville is still annexing land along Old Big Cove Road, and its own council records list those parcels with an Owens Cross Roads, AL 35763 mailing address. Source: Huntsville City Council annexation item 2026-401. A 35763 address can be City of Huntsville, the Town of Owens Cross Roads, or unincorporated Madison County.
If the house is inside Huntsville, the city inspections FAQ says floor covering is exempt from permitting and a permit is required when materials and labor exceed $250 or structural work is involved. Source: Inspections FAQ. Confirm your job with the Inspection Department at 256-427-5331. Outside city limits, ask Madison County or the town.
How do you request an estimate for a Hampton Cove house?
Send the ZIP, the street, the rooms, stairs, and any water history. Call (256) 440-7100 or use the estimate form. Callbacks are on weekdays. The national average about $4,723 per project (Angi, 2026, https://www.angi.com/articles/how-much-does-hardwood-flooring-cost.htm) is not a Hampton Cove quote. National refinishing ranges are on the refinishing cost page.
The Madison page covers the separate city on the west side of Huntsville. Hampton Cove is a request area. Coverage depends on a contractor confirming the ZIP.
Questions on this page
Is Hampton Cove in the City of Huntsville?
Parts of it are inside Huntsville city limits, but the 35763 ZIP is shared with Owens Cross Roads. Check whether your parcel is inside Huntsville before anyone treats a permit sentence as yours.
Can a Hampton Cove builder floor be refinished?
Solid floors and engineered floors with a thick wear layer often can. Thin engineered floors may only take a screen and recoat. The product name or a look at a floor vent opening tells you which.
Do I need a permit for new floors in Hampton Cove?
If the house is in Huntsville, the city FAQ lists floor covering as exempt but requires a permit over $250 in materials and labor or for structural work. Confirm with the Inspection Department at 256-427-5331.
Are stairs priced separately?
Yes. Treads, risers, nosing, and railings are their own line on a quote, separate from the square footage.
Does this site publish Hampton Cove prices?
No. The only install figure is a labeled national average from Angi. A local number comes from an in-home measure.